Accessories For Additional Functions – Accessories For Additional Functions – EACN

Parameter setting:

1.Confirm the motor rated value P1-01—P1-06 according to the motor nameplate after power on.
2.Set the encoder related parameters P1-23—P1-28 according to the encoder nameplate
3.Set P1-00,→ choose “2”, →Press “RUN”, system starts self-learning.
4.After self-learning completed, press P0-01 motor control mode,→choose “2“vector control with speed sensor (FVC).
5.Set the required frequency and run according to the operation
6.Press and hold PRG to display the U-00 monitoring parameters, and use the left and right arrow keys to switch to U-44. The display value is the encoder feedback frequency

Constant pressure water supply controller

Through the constant pressure water supply control board, there is no need for an external control circuit to achieve constant pressure water supply 1 to 3, 1 to 4 work frequency conversion control.
Adapt to EC610,650 series

LCD keyboard

LCD Chinese or English one-key shuttle keyboard with parameter copy function.
Adapt to EC610,650,670,6000 series

LED dual display large keyboard (customized)

Two-line LED digital display one-key shuttle keyboard, with parameter copy function.
Adapt to EC610,650,6000 series

LED single display keypad

LED digital single-line display keyboard (external cited).

Adaptto EC590,SMA series

Keyboard extension base

4G network keyboard (customized)

No display, support 4G wireless signal mobile phone remote control.
Bluetooth keyboard (customized)
Bluetooth communication
Adapt to EC610,650,6000 series

External cable to keyboard

9-core / 9-pin trapezoidal port with magnetic ring shielded wire.

Adapt to EC610,650,670,680, 6000 series

External cable to keyboard

Adapt to the full range
Note: Above pictures are for reference only due to hardware & software upgrade and the actual product shall prevail.